Seal-Crimp Machine SSC3

Sealing of three-core cables

Wide range of use

The SSC3 is designed for stripping, sealing and crimping of three single wires or three-core cables in one machine cycle. The seals and terminals are fed automatically and the wires are inserted by the operator. The machine starts when the sensor in the stripping unit is touched.

Short set-up time and high flexibility

A wide range of potential applications and a high degree of flexibility are achieved through the uncomplicated conversion to another product for processing.

Different tools can be used for crimping different terminals. Other seal types are made available through the simple and quick change of the Seal Kit (SSK).

The machine is equipped with the tried and tested handwheel for manual test operation after retooling and after maintenance work.

Quality assurance options

The integrated vacuum cleaner removes insulation remnants from the stripping process. The optional bad part cutter prevents the use of cables with incorrect crimps in the downstream process which in turn assists quality assurance.

Intuitive operating software

The touch screen control has an intuitive user interface for easy and safe operation in various languages. Selecting different user roles and operating modes as well as machine networking functions provides flexible and modern process sequences.

High safety for operators

The safety of the operator during processing is guaranteed by the closed design. When a safety cover is opened, the electrical safety circuit is interrupted and the machine is stopped.

Conform with the machinery directive

The crimping machine fully complies with all CE and EMC machine guidelines (mechanical and electrical safety, electromagnetic compatibility).

Product brochure

Brochure as a PDF document

Base equipment

  • Eccentric press
  • Machine cover
  • Zero cut module
  • Specific wire gripper
  • Stripping unit with trigger sensors
  • Seal Modul SSM
  • Seal Kit SSK
  • Vacuum cleaner
  • Stripe Chopper

Optional extentions

  • Crimp force monitoring
  • Bad part cutter
  • Paper winder
  • Color sensor
  • Networking module
  • Remote service module

Technical Data

Processable materials

WireThree single wires or three-core cables
Wire cross section: 0.2 – 2.5 mm² [1]
Cable outer diameter: Max. 5 mm
Sheath-removal length: Min. 40 mm [1]
SealsExternal dimensions: Max. Ø 7.5 mm, max. length 8.5 mm
All common seal types as well as hard shell seals
TerminalsTransversely belted stripes

Processing

Zero cut lengths1 – 3 mm [1]
Stripping lengths0.5 – 8.0 mm [1]

Performance and geometry

Drive0.75 kW three-phase motor
Motor speed440 – 2000 RPM
Pressing force20 kN
Stroke40 mm
Closing height135.78 mm

Controls

HMISTI 2015
DisplayTouchscreen

Supplies and interfaces

Power supply230 V, 50/60 Hz
Compressed air6 bar
NetworkRJ-45

Dimensions and weight

Width x Depth x Height1050 x 850 x 1500 mm [2]
Weight225 kg [2]

[1] Depending on the configuration of wire and terminal.
[2] Approximate indication for basic equipment.

Menu