Wide range of use
The SSC2 is designed for stripping, sealing and crimping of two single wires or two-core cables in one machine cycle. The seals and terminals are fed automatically and the wires are inserted by the operator. The machine starts when the sensor in the stripping unit is touched.
Short set-up time and high flexibility
A wide range of potential applications and a high degree of flexibility are achieved through the uncomplicated conversion to another product for processing.
Different tools can be used for crimping different terminals. Other seal types are made available through the simple and quick change of the Seal Kit (SSK).
The machine is equipped with the tried and tested handwheel for manual test operation after retooling and after maintenance work.
Quality assurance options
The integrated vacuum cleaner removes insulation remnants from the stripping process. The optional bad part cutter prevents the use of cables with incorrect crimps in the downstream process which in turn assists quality assurance.
Intuitive operating software
The touch screen control has an intuitive user interface for easy and safe operation in various languages. Selecting different user roles and operating modes as well as machine networking functions provides flexible and modern process sequences.
High safety for operators
The safety of the operator during processing is guaranteed by the closed design. When a safety cover is opened, the electrical safety circuit is interrupted and the machine is stopped.
Conform with the machinery directive
The crimping machine fully complies with all CE and EMC machine guidelines (mechanical and electrical safety, electromagnetic compatibility).
Brochure as a PDF document
- Eccentric press
- Machine cover
- Zero cut module
- Specific wire gripper
- Stripping unit with trigger sensors
- Seal Modul SSM
- Seal Kit SSK
- Vacuum cleaner
- Stripe choppper
- Crimp force monitoring
- Bad part cutter
- Paper winder
- Color sensor
- Networking module
- Remote service module
|Wire||Two single wires or two-core cables|
|Wire cross section: 0.2 – 2.5 mm² |
|Cable outer diameter: Max. 5 mm|
|Sheath-removal length: Min. 25 mm |
|Seals||External dimensions: Max. Ø 7.5 mm, max. length 8.5 mm|
|All common seal types as well as hard shell seals|
|Terminals||Transversely belted stripes|
|Zero cut lengths||1 – 3 mm |
|Stripping lengths||0.5 – 8.0 mm |
Performance and geometry
|Drive||0.75 kW three-phase motor|
|Motor speed||440 – 2000 RPM|
|Pressing force||20 kN|
|Closing height||135.78 mm|
Supplies and interfaces
|Power supply||230 V, 50/60 Hz|
|Compressed air||6 bar|
Dimensions and weight
|Width x Depth x Height||1050 x 850 x 1500 mm |
|Weight||225 kg |
 Depending on the configuration of wire and terminal.
 Approximate indication for basic equipment.