Cutting and Stripping Machine SAM2
Processing of wires with big cross sections
Adjustable parameters
The SAM2 offers the advantages of the SAM1 and convinces with additional functions such as processing bigger cross sections.
The machine is easy to operate by means of a touchscreen and the user-friendly operator interface. The language and the length measurement system of the user interface can be adapted to local conditions.
Flexibility for a wide range of applications
The modern database functions of the cutting and stripping machine increase comfort and possible applications. Product variants and associated process parameters can be saved unlimited and used for later productions.
All processing steps of the SAM2 are electronically controlled. The wire is automatically centered while prefeeding and pushing. For the optimum cable processing, the pressing force of the transportrollers is monitored.
High production rate
The 4-blade cutting head enables simultaneous stripping of the both ends of the wire. Thus the piece number capacity is increased by more than 1000 pieces per hour (as compared to 1-blade mode). In addition, wires can be stripped to an insulation length of approx. 18 mm.
Wide range of uses
The machine is suited for automatic cutting and stripping of single wires up to 16 mm² as well as round cables with a maximum outside diameter of 12 mm.
With an optionally available guide and blade kit, flat ribbon cable with a maximum width of 8 mm can also be processed. The machine can handle different insulation material such as PVC, Teflon and Silicon
Conform with the machinery directive
The crimping machine fully complies with the European directives regarding mechanical and electrical safety as well as electromagnetic compatibility.
Technical Data
Processable materials |
|
| Wire | Single wire |
| Cross sections: 0,02 – 16 mm² | |
| Cable outer diameter: Max. 12 mm | |
| Conductor: Fine braid, solid wire (1 mm²), copper or other materials | |
| Insulation: Teflon, PVC, Silicone, etc. | |
Wire prefeeding |
|
| Feeding | Roller and belt drive |
| Speed | Adjustable |
| Wire centering | Automatic |
| Roll pressure | Automatic |
Processing |
|
| Cutting lengths | 25 mm – 999 m (< 25 mm in short cut mode) |
| Stripping length | 1 mm – 130 mm (on one or both sides, full or semi strip) |
Control |
|
| Display | Touchscreen |
| Memory | 30 items local, numerous items in the data base |
| Functions | Data base and interfaces |
Supplies and interfaces |
|
| Electric supply | 100-230 V AC, 50/60Hz |
| Compressed air | 6 bar |
| Network | RJ-45 |
| Interfaces | RS232, Ethernet, wire de-reeler, hot stamp printer, inkjet printer |
Dimensions and weight |
|
| Width x depth x height | 550 x 395 x 370 mm [1] |
| Weight | 40 kg [1] |
[1] Approximate indication for basic equipment.
Product brochure
Download the brochure as a PDF document
Fully automatic machine
Turn the SAM2 into a highly productive fully automatic wire processing system.
The wire prefeeder ZFG50 consisting of a dereeler and wire accumulator provides for a virtually drag free presentation of the wire to the wire processing machine. The cutting and stripping machine SAM2 is ergonomically and user-friendly placed on a processing table.
Also attached to the table is the pivotable wire coiler CD-11 which sequentially loads wire in two bowls and they can be unloaded during production.
(Figure shows Cutting and Stripping Machine SAM1)
Illustrations of the product are exemplary and may show options as well as specific equipment.
Subject to errors and alterations.