
Cutting and Stripping Machine SAM1
Adjustable parameters
The SAM1 is a compact and efficient bench-top wire processing machine, which is completely electronically controlled. All necessary process data, such as cutting length, stripping length, cutting depth and feeding speed, can be configured via the touchscreen. The language as well as the length measurement system of the user-friendly user interface can be changed to local conditions.
High production rate
The 4-blade cutting head allows for simultaneous stripping of the leading and trailing end of the wire. As a result, the production rate can be increased by more than 1000 pcs/hr, in comparison to the 1-blade mode. In addition, wires with an insulation length of approx. 18 mm can be stripped as a standard.
Simple change-over
The roller and drive belt pressure of the automatic wire feeding can be adjusted independently according to the material being processed. The guide tubes can be changed within seconds and no tools are required.
Wide range of applications
The machine is suited for automatic cutting and stripping of single wire up to 6 mm² as well as round cable with a maximum outside diameter of 6 mm. The machine can handle different insulation material such as PVC, Teflon and Silicon. With an optionally available guide and blade kit, flat ribbon cable with a maximum width of 8 mm can also be processed.
Conform with the machinery directive
The cutting and stripping machine fully complies with all european directives regarding mechanical and electrical safety as well as electromagnetic compatibility.

Technical Data
Processable wire |
|
Wires | Single wire |
Cross sections: 0,02 – 6 mm² | |
Cable outer diameter: Max. 6 mm | |
Conductor: Fine braid, solid wire (1 mm²), copper or other materials | |
Insulation: Teflon, PVC, Silicone, etc. | |
Wire prefeeding |
|
Feeding | Roller and belt drive |
Speed | Adjustable |
Wire centering | Manual adjustable |
Roll pressure | Manual adjustable |
Processing |
|
Cutting lengths | 25 mm – 999 m (< 25 mm in short cut mode) |
Stripping length | 1 mm – 130 mm (on one or both sides, full or semi strip) |
Control |
|
Display | Touchscreen |
Memory | 30 items local |
Supplies and interfaces |
|
Electric supply | 100-230 VAC, 50/60 Hz |
Compressed air | 6 bar |
Network | RJ-45 |
Interfaces | RS232, Ethernet, wire de-reeler, hot stamp printer, inkjet printer |
Dimensions and weight |
|
Width x depth x height | 470 x 395 x 370 mm [1] |
Weight | 30 kg [1] |
[1] Approximate indication for basic equipment.
Product brochure
Download the brochure as a PDF document

Fully automatic machine
Turn the SAM1 into a highly productive fully automatic wire processing system. The wire prefeeder ZFG50 consisting of a dereeler and wire accumulator provides for a virtually drag free presentation of the wire to the wire processing machine.
The cutting and stripping machine SAM1 is ergonomically and user-friendly placed on a processing table. Also attached to the table is the pivotable wire coiler CD-11 which sequentially loads wire in two bowls and they can be unloaded during production.
Illustrations of the product are exemplary and may show options as well as specific equipment.
Subject to errors and alterations.