Crimping Machine EPS 2002 with Stripper 517

Processing of wires with short stripping lengths

Connecting with individual terminals

The powerful machine is designed for stripping of wires with small cross-sections and short stripping lengths also crimping with individual terminals.

The terminals are fed automatically and the wires are inserted by the operator. The machine starts when the sensor in the stripping unit is touched.

Adjustable process parameters

For individual adjustment to the processing material, the stripping length, the stripping layer and the crimp position can be set in 0.02 mm increments. The cutting depth for stripping can be set to an accuracy of 0.01 mm. The integrated suction system removes insulation remnants from the stripping process.

Different tools can be used for crimping different contacts. The machine is equipped with the tried and tested handwheel for manual test operation after retooling and after maintenance work.

Intuitive user interface

The touch screen control has an intuitive user interface for easy and safe operation in various languages. Selecting different user roles and operating modes as well as machine networking functions provides flexible and modern process sequences.

High safety for the operator

The safety of the operator during processing is ensured by the closed slide guard. When opening, the electrical safety circuit is interrupted and the machine is stopped.

Conform with the machinery directive

The crimping machine fully complies with all CE and EMC machine guidelines (mechanical and electrical safety, electromagnetic compatibility).

Product brochure

Brochure as a PDF document

Base equipment

  • Eccentric press
  • Machine cover
  • Stripping module
  • Foot switch
  • Trash box

Optional extensions

  • Zero cut module
  • Crimp process monitoring
  • Bad part cutter
  • Paper winder

Technical Data

Processable materials

Wire Single wires
Wire cross section: 0.05 to 0.5 mm² [1]
Terminals Transversely belted stripes

Processing

Stripping lengths < 10 mm [1]
Sheath-removal lengths > 10 mm [1]

Performance and geometry

Drive 0.75 kW three-phase motor
Motor speed 440 – 2000 RPM
Pressing force 20 kN
Stroke 40 mm
Closing height 135.78 mm

Controls

Software STI 2015
Display Touchscreen

Connection data and interfaces

Power supply 230 V, 50/60 Hz
Compressed air 6 bar
Network RJ-45

Dimensions and weight

Width x Depth x Height 320 x 500 x 700 mm [2]
Weight 108 kg [2]

[1] Depending on the configuration of wire and terminal.
[2] Approximate indication for basic equipment.

Menu