Crimping Machine EPS 2001

Base machine with quality system SQS04

Connecting multi-core cables

The comprehensively equipped machine is designed for crimping single or multi-core cables.

The terminals are fed automatically and the wires are inserted by the operator. The machine starts automatically when the sensor in the stripping unit is touched.

Wide range of use options

A wide range of potential applications and a high degree of flexibility are achieved through simple conversion to another product for processing. Different tools can be used for crimping different terminals.

The machine is equipped with the tried and tested handwheel for manual test operation after retooling and after maintenance work.

Quality assurance options

The integrated crimp force monitoring and the bad part cutter prevents the use of cables with incorrect crimps in the downstream process which in turn assists quality assurance.

Intuitive operating software

The touch screen control has an intuitive user interface for easy and safe operation in various languages.

Selecting different user roles and operating modes as well as machine networking functions provides flexible and modern process sequences.

High safety for the operator

The safety of the operator during processing is ensured by removable protective covers. When removing, the electrical safety circuit is interrupted and the machine is stopped.

Conform with the machinery directive

The crimping machine fully complies with all CE and EMC machine guidelines (mechanical and electrical safety, electromagnetic compatibility).

Product brochure

Brochure as a PDF document

Base equipment

  • Eccentric press
  • Machine cover
  • Crimp force monitoring
  • Bad part cutter
  • Foot switch
  • Trash box

Optional extensions

  • Crimping applicator
  • Specific wire gripper
  • Paper winder
  • Networking module
  • Remote service module
  • Stripe chopper

Technical Data

Processable materials

WireSingle-core or multi-core sheathed cables
Wire cross section: 0.25 – 6 mm² [1]
TerminalsLongitudinal or transversely belted stripes

Performance and geometry

Drive0.75 kW three-phase motor
Motor speed440 – 2000 RPM
Pressing force20 kN
Stroke40 mm
Closing height135.78 mm



Supplies and interfaces

Power supply230 V, 50/60 Hz
Compressed air6 bar

Dimensions and weight

Width x Depth x Height750 x 600 x 700 mm [2]
Weight121 kg [2]

[1] Depending on the configuration of wire and terminal.
[2] Approximate indication for basic equipment.