Crimping Machine EPS 2001 for HCT4 Terminals

Processing of high voltage cables

Preparation for HPS40 connectors

The comprehensively equipped machine is designed for stripping two-core sheathed cables and crimping of HCT4 terminals for HPS40 connectors.

The wires are inserted by the operator and the terminals are fed automatically. The machine starts itself when the sensor in the stripping unit is touched.

Functions for quality assurance

The machine is equipped with the tried and tested handwheel for manual test operation after retooling and after maintenance work.

The integrated bad part cutter prevents the use of cables with incorrect crimps in the downstream process which in turn assists quality assurance.

Intuitive operating software

The touch screen control has an intuitive user interface for easy and safe operation in various languages. Selecting different user roles and operating modes as well as machine networking functions provides flexible and modern process sequences.

High safety for operators

The safety of the operator during processing is ensured by removable protective covers. When removing, the electrical safety circuit is interrupted and the machine is stopped.

Conform with the machinery directive

The crimping machine fully complies with all CE and EMC machine guidelines (mechanical and electrical safety, electromagnetic compatibility).

Product brochure

Brochure as a PDF document

Base equipment

  • Eccentric press
  • Machine cover
  • Zero cut module
  • Stripping unit
  • Bad part cutter
  • Foot switch
  • Trash box

Optional extensions

  • Slide cover
  • Specific wire gripper
  • Vacuum cleaner
  • Paper winder
  • Color detection
  • Networking module
  • Remote service module
  • Stripe chopper

Technical Data

Processable materials

Wire Two-core sheathed cables
Wire cross section: 2.5 mm², 4.0 mm² or 6.0 mm² [1]
Sheath-removal length: 29 mm [1]
Terminals Transversely belted HCT4 terminals

Performance and geometry

Drive 0.75 kW three-phase motor
Motor speed 440 – 2000 rpm
Pressing force 20 kN
Stroke 40 mm
Closing height 135.78 mm


Software STI 2015
Display Touchscreen

Supplies and interfaces

Power supply 230 V, 50/60 Hz
Compressed air 6 bar
Network RJ-45

Dimensions and weight

Width x Depth x Height 830 x 600 x 700 mm [2]
Weight 142 kg [2]

[1] Depending on the configuration of wire and terminal.
[2] Approximate indication for basic equipment.