EPS 2002 |
| |
 |
| |
for crimp applications |
| |
 |
| |
Control unit |
| |
 |
| |
Eccentric drive |
| |
Options
- Crimping Applicator
- Stripping Module
- Crimp Quality Monitoring
- Crimp Cut Module
|
|
Crimp machineProcessing of cross sections up to 6 mm²
Description
This standard crimp machine is designed for crimping terminals using Schaefer quick change applicators and for stripping cables using Schaefer stripper modules and for using both at the same time, in one single operation.
For manual operation and set up a hand-wheel is integrated. The machine control system with display allows to select the language and the machine status or individual functions can be prompted.
Range of Application
Schaefer crimp machines are used in the series production of the cable processing industry.
Examples Of Use
Eccentric presses are designed to connect wires and terminals in multiple applications.
Product Combination Possibilities
For the quality management the crimp monitoring system can be added on. Also stripping module 517 can be integrated.
Technical Data
| Supplies |
| Power Supply |
230 V, 50 Hz |
| Drive |
0,75 kW rotary current motor |
| Processable Wire |
| Cross Sections |
up to 6 mm² [1] |
| Rpm Of Motor |
440 - 2000 rpm |
| Force |
20 kN |
| Stroke |
40 mm |
| Stroke Time |
0,3 s |
| Shut Height |
135,78 +/- 7 mm |
| Applicator Fixture |
Quick-Change-System |
| Base Frame Material |
Steel or Aluminum |
| Control |
integrated |
| Display |
Display |
| Temperature Range |
| Operation |
15 °C - 40 °C |
| Storage |
0 °C - 60 °C (rF < 80%) |
| Dimensions & Weight |
| W x D x H |
320 x 500 x 700 mm [2] |
| Weight |
90 kg [2] |
[1] depending on the used material and geometry of the terminal
[2] approximately in basic configuration, without attached parts like terminal feeding equipment
|
The products shown are examples of currently realized systems. Providing optimised system solutions based on customer requirements is our strength. |
