EPS 6000 |
| |
 |
| |
for crimp applications |
| |
 |
| |
Eccentric drive |
| |
 |
| |
Hand-wheel for set-up |
| |
Options
- Crimping Applicator
- Stripping Module
- Crimp Quality Monitoring
- Crimp Cut Module
|
|
Eccentric PressProcessing of cross sections up to 35 mm²
Description
Crimp machine for crimping terminals on strip up to a maximum wire cross-section of 35 mm² depending on the terminal material.
For loose terminals inserted manually into the crimping applicator, the unit delivered with a special guard with a pneumatically actuated sliding door with a safety switch with additional locking device.
Range of Application
Schaefer crimp machines are used in the series production of the cable processing industry.
Examples Of Use
Eccentric presses are designed to connect wires and terminals in multiple applications.
Product Combination Possibilities
For the quality management the crimp monitoring system can be added on.
Technical Data
| Supplies |
| Power Supply |
3 x 400 V, 50 Hz |
| Drive |
3 kW rotary current motor |
| Processable Wire |
| Cross Sections |
up to 35 mm² [1] |
| Rpm Of Motor |
1420 rpm |
| Force |
50 kN |
| Stroke |
40 mm |
| Stroke Time |
0,7 s |
| Shut Height |
195,78 +/- 7 mm [3] |
| Applicator Fixture |
Quick-Change-System |
| Base Frame Material |
Steel |
| Control |
by frequency converter |
| Display |
none |
| Temperature Range |
| Operation |
15 °C - 40 °C |
| Storage |
0 °C - 60 °C (rF < 80%) |
| Dimensions & Weight |
| W x D x H |
550 x 700 x 780 mm [2] |
| Weight |
220 kg [2] |
[1] depending on the used material and geometry of the terminal
[2] approximately in basic configuration, without attached parts like terminal feeding equipment
[3] can be set up to the standard shut height of 135,78 mm
|
The products shown are examples of currently realized systems. Providing optimised system solutions based on customer requirements is our strength. |
