EPS 10000 |
| |
 |
| |
for crimp applications |
| |
 |
| |
Eccentric drive |
| |
 |
| |
Post jig tool |
| |
Options
- Crimping Applicator
- Stripping Module
- Crimp Quality Monitoring
- Crimp Cut Module
|
|
Eccentric PressProcessing of cross sections up to 50 mm²
Description
Eccentric press for crimping terminals on strip up to a maximum wire cross-section of 50 mm² depending on the terminal material.
For loose terminals inserted manually into the crimping applicator, the unit delivered with a special guard with a pneumatically actuated sliding door with a safety switch with additional locking device.
Range of Application
Schaefer crimp machines are used in the series production of the cable processing industry.
Examples Of Use
Eccentric presses are designed to connect wires and terminals in multiple applications.
Product Combination Possibilities
For the quality management the crimp monitoring system can be added on.
Technical Data
| Supplies |
| Power Supply |
3 x 400 V, 50 Hz |
| Drive |
4 kW rotary current motor |
| Processable Wire |
| Cross Sections |
up to 50 mm² [1] |
| Rpm Of Motor |
1420 rpm |
| Force |
100 kN |
| Stroke |
50 mm |
| Stroke Time |
1,0 s |
| Shut Height |
maximum 204,8 mm [3] |
| Applicator Fixture |
Quick-Change-System |
| Base Frame Material |
Steel |
| Control |
by frequency converter |
| Display |
none |
| Temperature Range |
| Operation |
15 °C - 40 °C |
| Storage |
0 °C - 60 °C (rF < 80%) |
| Dimensions & Weight |
| W x D x H |
750 x 800 x 900 mm [2] |
| Weight |
460 kg [2] |
[1] depending on the used material and geometry of the terminal
[2] approximately in basic configuration, without attached parts like terminal feeding equipment
[3] can be set up to the standard shut height of 135,78 mm
|
The products shown are examples of currently realized systems. Providing optimised system solutions based on customer requirements is our strength. |
